The AirBench RP Downdraft Bench is a dust extraction solution for industries and application which generate course or heavy dusts – such as Silica and Stone dust (brick, slate etc).
The AirBench RP Cartridge filters are cleaned quickly by the inbuilt reverse pulse jet system. The pulse jet system emits a short burst of compressed air to clean excess dust off the filters. The RP Bench has dust collection trays underneath the filters to collect the dust cakes after filter cleaning, allowing for easy disposal.
- Aggregate and Silica Dusts
- Heavier Dust Loads
- Glass fibre Reinforced Plastic (GRP) trimming and finishing
- Dry stone cutting, ceramics
- And More
- Several Sizes Available
- Open Working Area
- Pulse Jet Filter Cleaning
- Heavy duty
- Dust bins
- 230v Plug and Play
- Airline Required
- Speed Control
- HEPA Filters
- Airline Interlink
- Timed Adjustment
Intelligent Pulse Jet Control works via an easy two button operation – Green to go; Red to stop; Hold Green to clean filters (airline required).
This ‘RP’ bench configuration is specified for extraction of non-exploding dusts with a relatively large particle size in the range of 5-10 microns. Sample applications include dry stone cutting, trimming and fettling of plastics, atmospheric dusts, Silica flour or similar powder weighing and processing, GRP trimming and finishing, and ceramics.
The RP Bench can be fitted with an H13 HEPA filter as well for increased level of filtration for finer dusts (RPL).
|Model||Dimensions (mm)||Ventilated Area (mm)|
|RP1212||1270 x 1300 x 900||1200 x 900|
|RP1920||1950 x 960 x 900||1200 x 900|
|RPL1212||1950 x 1300 x 900||1200 x 900|
|Filter Type||Pre Filter||Main Filter||Applications|
|M – Stone Dusts||No||High Volume Cartridges||Aggregates, Silica, Ceramics, Stone, Plastics, GRP, Atmospheric Dusts or Similar|
|N – Stone and Aggregate Dusts||No||High Volume Cartridges and H13 HEPA 99.99% @ 0.3 Microns||Aggregates, Silica, Ceramics, Stone, Plastics, GRP and similar|