Mobile Filtration Arm Unit VX-PA250

Datasheet:

Combining our industry leading filtration technology giving both chemical and particulate protection to 99.997% at 0.3 micron.
The inflow gives 250m³/hour to give more than sufficient flow to offer point of use protection for all laboratory source fumes and vapours.
The system incorporates the largest possible filters to provide full compliance with BS7989:2001 and COSHH regulations.
The main filter consists of 14kg of activated carbon that will be specifically matched to your application (See below for a full list of available
carbon filters) and is monitored with a hydrocarbon detection system to assist in the replacement of carbon filters.
A H14 HEPA filter is fitted to the exhaust for the containment of particulate to 99.997% efficiency at 0.3μm.

Airflow Monitor System :
The status of the airflow into the cabinet is constantly displayed on the control panel and is monitored and controlled electronically by the microprocessor to ensure the optimal airflow is achieved at all times.

Simple Operation :
The standard 2 meter radius arm offers an almost infinite range of extraction locations to suit whatever equipment or processes you have. The arm easily rotates to almost 360° and all pivots and joints are deliberately located outside the airstream, this prevents contamination or clogging of the mechanical parts and ensures optimal inflow and reduced pressure drop – this in turn ensures low noise and high performance operation.

The VX-PA250 mobile fume filtration arm is simple to operate and easy to manoeuvre. The unit fits easily through a standard doorway and the non-mark lockable castors are friction free and so any operator can adjust the working position easily.

A wide range of carbon filters are available to filter a number of chemicals including Solvents, Mineral acids, Alkali, Sulphurs, Ammonia and Diethyl Ether. For filter suitability against your requirement, please contact the Vodex office.