ESD Raised Access Floor Panels

Datasheet:

All ESD panels / installed systems supplied are guaranteed to comply with the electrical requirements of BS IEC 61340-5. Full electrical testing and certification is undertaken to this Standard. We can supply ESD raised flooring panels to fit existing pedestals or supply and install complete raised flooring systems with new pedestals.
Our special ESD raised access flooring panel uses an encapsulated construction of heavy duty chipboard with galvanised steel bonded to both surfaces. Colorex SD vinyl is bonded on to the top surface and the panel has a protective ABS edge band all round. The full-depth edge band provides improved tightness of fit between adjoining panels; giving a firm air tight seal for an air plenum. The panels are constructed to exacting tolerances to ensure controlled electrical leakage resistance through to the in-situ pedestals via a conductive pad. All panels are electrically linked to ensure controlled leakage resistance across the floor surface.
A range of adjustable-height pedestals are available conforming to the performance requirements of both BSEN and PSA specifications – giving void height options from 4cms to 200cms. Pedestals may be fixed using adhesive or mechanically fixed to the slab. Locating lugs on the pedestal head ensure correct panel seating with the additional option of screw fixing for additional rigidity. Where additional lateral stability is required or where floor heights exceed 60cms, stringers may be attached to the pedestals. These stringers will improve lateral stability and rigidity but will not affect load-bearing performance or electrical properties.
The panels and raised flooring systems can be supplied in Medium Grade (distributed load > 8kN / sq m) or Heavy Grade (distributed load > 12kN / sq m).

Key Features:

• Wide range of colours available.
• Very Hard Wearing.
• Meets IEC 61340-5-1
• Easy to Ground.
• Panels easily lifted for access.
• Medium (33mm) and thick (42mm) panels available