Our ESD Bench Matting is a dual layer static dissipative rubber mat which is a highly durable work surface for EPA/ ESD sensitive environments.
The dissipative top layer of the mat is resistant to abrasion, heat, solder flux and most commonly used solvents. The black conductive bottom layer of the ESD mat provides a superior and consistent ground path.
The smooth texture can be easily cleaned and maintained. The operative can be grounded to the mat via the included 10mm grounding stud and the mat is grounded to a common earth point via the second grounding stud. Additional 10mm studs can be added for extra grounding points.
Our ESD Mats can be bought either in pre-cut sizes or as a 10mtr roll allowing you to cut your own mats to your own size. If you are buying a roll to cut your own ESD Mats then you will need the ESD Mat Studding Kit – Sold Separately (there should be a handy link at the bottom of the page)
These ESD Mats meet the requirements of EN61340-5-1 and US ESD Associations ANSI S4.1 and S20.20 guidelines. The product is also certified for ROHS regulations.