The KEMPER exhaust set consists of a 2 m, 3 m or 4 m long exhaust arm, a extract fan with wall bracket and a motor protection switch. For use where it is not absolutely necessary to filter the extracted air.
These exhaust arms are excellent for the extraction of:
- welding smoke/ fumes
- light dust
- and solvents.
The hose-type exhaust arm consists of an internal parallelogram support linkage with spring support and a polyester fabric reinforced hose with PVC coating with coiled steel wire bonded in. The 360° rotating evacuation hood with throttle valve can be swiveled in all directions.
The housing and impeller of the fan consist of non-sparking, cast silumin (an aluminium alloy). The impeller is balanced statically and dynamically. This ensures perfectly smooth operation and minimum noise development.
The housing has a powder finish and includes a connection flange for a Ø 160 mm exhaust pipe.
The KEMPER Extraction Exhaust Arm and Fan kits comply with HSE and COSHH requirements for controlling airborne contaminates in the work place.
|2m Arm||3m Arm||4m Arm|
|Power Supply:||x3 400v||x3 400v||x3 400v|